Chris Victor wrote:
>
> Howdy Fellow RF Amplifier Clan,
>
> I just picked up a BTI LK-2000D amp and was wondering if anybody else on
> this reflector has had one/used one
> in the past years. It's got a 3-1000Z tube and from what I'm told puts
> out 'just fine'.
>
> I plan to use it only between 80-20mtrs and just need your comments
> good/bad.
>
> This model is the seperated version with the RF Deck sperate from the
> 'roll-a-bout coasters' pwr supply.
>
> Before I light it up, I do plan to carefully inspect the bandswitch and
> remove all corrosion areas [if any].
>
> Rich: I do realize that yes it is a 3-1000z and is prone to 'parasitics'
> on 15 & 10mtrs, but I don't plan to use it up there. And do realize
> that it could even oscilate on the lower freq's as well....
>
> Chris WA6SUY "The only amps that are worth watching are the ones that
> glow at you"
> San Mateo, CA. cvictor@hooked.net
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
Hi Chris...I had a BTI and thought it work well. Enjoy it and see you
on the air.
Randy
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|