Amps
[Top] [All Lists]

[AMPS] Splatter and ALC

To: <amps@contesting.com>
Subject: [AMPS] Splatter and ALC
From: measures@vc.net (Rich Measures)
Date: Mon, 9 Jun 97 04:51:28 -0700
>At 12:38 AM 6/9/97 +0000, you wrote:
>
>>Audio reports have NOTHING to do with excessive IMD. ...
>snip....

>There was a multi-page article in one of the ham magazines years ago
>stating that new tubes in a linear amp produce clean, crisp, audio
>for a period of time...however long it takes the "new" to wear off
>a tube. That graphite 3-500Z's produce far cleaner and crisper audio
>than their predecessors, and several other descriptions of how linear
>amplifiers can act as audio processors. I don't remember if it was an 
>April fool's spoof or not, ...snip...

It was not an April fool spoof, Phil, although it appeared that one wrote 
it.  The author also recommended running HIGHER filament voltage on the 
graphite 3-500Z --- no fooling.  
Rich---

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>