Amps
[Top] [All Lists]

[AMPS] Re: 30L1 Grid Circuit

To: <amps@contesting.com>
Subject: [AMPS] Re: 30L1 Grid Circuit
From: measures@vc.net (Rich Measures)
Date: Sat, 17 May 97 20:21:24 -0700
>At 02:19 PM 5/17/97 +0000, you wrote:
>>Hi Phil,
>>
>>.........The 
>>AL-811H ........... (it uses neutralization and tuned input). 
...snip...
>>If you look at the Heathkit Warrior and Gonset 811A PA, you'll see 
>>they are neutralized. So is the AL-811H.
The Warrior and the Gonset were thought to be neutralized.  However, they 
were not and they were not stable.  The SB-200 and the SB-220 were not 
"neutralized" because someone at Heath came to their senses.  
...snip...
>>I'm not saying the 30L1 was poorly constructed, but it certainly 
>>would have been a better PA if they neutralized the PA. In that case, 
>>any length cable could have been used.
The reason why Collins Radio Co. did not neutralize the 30L-1 is because 
there is no way to neutralize a single ended g-g amplifier.  [see *Care 
and Feeding of Power Grid Tubes*].   Mr. Rauch has apparently succeeded 
in convincing himself that he can do that which is not possible.  
Rich---

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>