Amps
[Top] [All Lists]

[AMPS] Class C design

To: <amps@contesting.com>
Subject: [AMPS] Class C design
From: measures@vc.net (Rich Measures)
Date: Sat, 29 Mar 97 20:45:05 -0800
>Subject:     [AMPS] Class C design
>Sent:        3/29/1997 7:38 PM
>Received:    3/29/1997 8:06 PM
>From:        Steve Bookout, sbookout@mnsinc.com
>To:          amps@contesting.com
>
>Hi all.
>

>For years I have wanted to build a grid driven amp and now I have a bit
>of an excuse to do it.
>
>The situation is as follows:
>
>I have decided to build a class C amp for 15 meters using a pair of
>4-400's.  I ONLY work CW and I have lots of tubes, sockets, chimneys,
>fil xfmrs, etc.
>I would like to end up with close to 1500 watts when I'm done. ...snip,,,
4kV on the anodes will so 1500w out.  However, Class C places an 
unsymmetrical load on the exciter.   You may have some SWR problems to 
resolve.  If you want it to oscillate, do not neutralize it.  
>Am I asking too much from a pair of 4-400's?
No
>Am I nuts?
Probably not unless you are expecting a ufo to pop out from behind the 
Hale-Bott comet with an extensive selection of amp parts at 1970s prices. 
 


R. L. Measures,ag6k,805-386-3734    


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>