JOHN BASILOTTO wrote:
>
> I have an Icom 756. I was using it with a Drake L4B. At first everything was
> fine; after about 30 days the reed relay in the Icom froze stuck. The Icom
> relay is rated at 16volts@2amps. The Drake amp has a 12 volt relay but has a
> potential of 26volts with no load. Consider using an aux. relay; otherwise
> you too may have to replace an Icom relay.
> 73, John w5GI
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
Put a 33 or 47 ohn, 1/2 watt resistor in series with the keying
line....K2RK
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|