favorable except for early failures of the h.v. diode bridge rectifiers
that were over-stressed. Ten-Tech redesigned the board by adding
heavier diodes and one more per leg. These are now 1000V PRV @ 3.0A.
each. I feel that the diodes should be FULLY compensated with
capacitors as they are still only resistively compensated.
Marv, W6FR
w6frmarv@juno.com
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA
|