Yaesu 2 meter FM transceivers and power supply For Sale:
Yaesu FT-1900, 2 meter FM Transceiver:
The ruggedly built Yaesu FT-1900R transceiver has strong
receiver performance, covering 136 to 174 MHz. It has
illuminated front panel keys and boasts 200 memories.
There is also 10 channel NOAA weather receive. You get
CTCSS and DCS Encoder and Decoder circuits. Keyboard
entry of frequencies directly from microphone is supported.
The supplied MH-48A6J DTMF hand mic is backlit.
The FT-1900 requires 13.8 V DC at 11 Amps.
Features:
200 Memories (6 Character)
8 Memory Banks
55/25/10/5 Watts Output
APO - Automatic Power-Off
ARS - Automatic Repeater Shift
Busy Channel Lock-Out
DTMF Memories
CTCSS and DCS Encode/Decode
CW Trainer
Severe Weather Alert
Backlit DTMF Mic
This one works 100% and looks like new.
It is still in its original box.
With mic, power cord, mobile mount and manual for $100.
Yaesu FT-1802 M, 2 meter FM Transceiver:
The FT-1802 M features outstanding audio on both transmit
and receive. It has strong receiver performance, covering 136
to 174 MHz, with illuminated front panel keys and boasts 221
memories. There is also a 10 channel NOAA weather bank. You
get CTCSS and DCS Encoder and Decoder circuits. The FT-1802M
even has a unique CW trainer to practice Morse Code. The
FT-1802 M has a rugged die-cast chassis.
The supplied MH-48A6J DTMF hand mic includes four
programmable keys.
Features:
221 Memories
8 Memory Banks
50/25/10/5 Watts Output
APO - Automatic Power-Off
ARS - Automatic Repeater Shift
Busy Channel Lock-Out
DTMF Memories
CTCSS Encode/Decode
CW Trainer
Password Function
Backlit DTMF Mic
This particular unit works 100% and looks like new.
With mic, power cord, and manual for $100.
Astron RS-20 A, 20 amp Power Supply:
The Astron RS-20 A is a very common power supply around
most ham shacks. It provides 13 V DC for many ham rigs.
Features:
Solid State Electronically Regulated
Fold-Back Current Limiting Protects Power Supply from
...excessive current & continuous shorted output
Crowbar Over Voltage Protection
Excellent Regulation & Low Ripple at low line input voltage.
Heavy Duty Heat Sink
Chassis Mount Fuse
Three Conductor Power Cord
Specifications:
Input Voltage 105-125Vac
Output Voltage 13.8Vdc (internally Adjustable 11-15V)
Ripple Less than 5mV peak-peak (full load & low line)
Continuous Duty 16 Amps; ICS 20 Amps
Size 5" x 9" x 10-1/2"
This particular supply works great. It only varies 0.01 Volts
with a load! Cosmetically it looks great.
With paper work for only $65.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
Prices do not include shipping from Florida.
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to W8EK@FLHam.net or W8EK@arrl.net
Voice Phone (352) 732-8400
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|