Cant help there. Havent seen that issue.
My issue with the FT990 is that on CW my tone seems to be 200 Hz above the
receive frequency. I assume that this is a pot adjustment, but which one?
73 Rich NN3W
----- Original Message -----
From: "Ronald A. Stunden " <ve_7_yc@shaw.ca>
To: <Yaesu@contesting.com>
Sent: Thursday, November 19, 2009 7:19 PM
Subject: [Yaesu] FT990
>I have two FT990s that have the same problem. they both jump frequency
> about 50 -70cy's then after a few seconds jump bacl again, Anyone ever
> have this problem? Also would like to get the default for the USB/LSB
> trim pots (On top under the flap) Thanks Ron VE7YC
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|