To use both the Auto-DSP and the Manual Notch on the MP like I do John (and
Scott), go into Menu 2-9 notch option. There are three options there: 1)
iF-notch (which is the manual notch) 2) Auto-dSP (which is of course the
Auto DSP Notch) and 3) SELEct (which is for both the manual and dsp
notches). I use both at the same time with out any problems. When not
wanting the manual IF notch function, just crank the IF Notch know all the
way to one side (or change the menu 2-9 setting of course).
Due to the different rom levels in MP's, there may be some earlier versions
that didnt have this, but I dont know that for a fact. Maybe others can help
out with this too.
.... one of the many benefits of the MP ..... HI HI
73 from Bill - WD8ARZ
----- Original Message -----
From: "John Geiger (NE0P)" <ne0p@lcisp.com>
To: <1000mp@mailman.qth.net>; <yaesu@mailman.qth.net>;
<yaesu@contesting.com>
Sent: Tuesday, October 04, 2005 1:50 PM
Subject: [1000mp] FT1000MP Menu settings for notch filters
I am a little confused about getting the FT1000MP set up for the different
notch filters. I understand the IF-Notch menu setting, but different
writings about the radio seem to indicate that you can have both the manual
IF notch and the autonotch on at the same time. Does the Auto-DSP menu
setting do this? I tried this yesterday, turned on the EDSP, but don't
think I was hearing the autonotch working. I did not have the notch button
on at that time. So what menu setting do I need to use and what buttons do
I push to get both the IF manual notch and the DSP autonotch working at the
same time on SSB?
73s John NE0P
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|