Hi Ted,
As far as I know.. All key jacks become keyer active when the keyer is
turned on!!
There really is no way around it... What I usually do is the keyer portion
of the what
ever logging software I have..
You can of course use the keyer, but not the W9XT card...
73 es GL Will NA2NA
telnet://na2na.net
An AR-Cluster node
----- Original Message -----
From: "Ted Boerkamp" <tboerkamp@cogeco.ca>
To: "Yaesu reflector" <yaesu@contesting.com>
Sent: Monday, July 04, 2005 5:23 PM
Subject: [Yaesu] FT1000MP and W9XT v.k. problem
> Hello all,
> I recently purchased a used (but mint condition) FT1000MP
> and I am having a bit of trouble being able to use the built in cw keyer
> on
> the 1000 and the cw interface of the W9XT card at the same time. I have my
> bencher paddles plugged into the jack on the back of the radio and the
> plug
> for the cw keying from the W9 card going into the jack on the front of the
> radio just above the mic jack.
> Problem is: I cannot have the keyer on the 1000 turned on at the same time
> as I use the W9 cw interface. It distorts totally everything sent from the
> computer until I turn the radio keyer off. What am I missing here?? Does
> anyone else have this combination working? and if so, how are your paddles
> and interface cables hooked up?? Is this a possible menu issue?? Any help
> would be greatly appreciated.
>
> 73 Ted VE3SS
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|