You might try doing the Las Vegas hard reset. It's explained in the manual.
That same thing happened to my FT-990
and the problem turned out to be a bad RF board that cost $300.00 to replace
from Yaesu out in CA.
73,
Thomas F. Giella, KN4LF
Plant City, FL, USA
EL87WX
Florida Space & Atmospheric Weather Institute:
http://www.kn4lf.com/fsawi.htm
KN4LF Daily Solar Space Weather & Geomagnetic Data Archive:
http://www.kn4lf.com/kn4lf5.htm
KN4LF 160-10 Meter Amateur Radio Resources & More:
http://www.kn4lf.com/kn4lf.htm
Friend Website Design Studio:
http://www.kn4lf.com
----- Original Message -----
From: "Chris" <ck@ckradio.net>
To: <yaesu@contesting.com>
Sent: Tuesday, July 22, 2003 2:54 AM
Subject: [Yaesu] Yaesu FT-990 Stuck in Transmit
> I have an ft-990 that's stuck in transmit mode just after you turn it
> on. None of the buttons function. It's locked in transmit.
> I can remember reading about this before but can't find it right now.
> Anyone remember the cause of this problem? Thank you, Chris
> Please respond to ck@bellsouth.net
>
>
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
---
Outgoing mail is certified Virus Free Thanks To Grisoft AVG.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <yaesu@contesting.com>
Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003
|