Yaesu
[Top] [All Lists]

[Yaesu] FT-1000MP failure

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-1000MP failure
From: k9ig@contesting.com (Greg Clark)
Date: Mon, 08 Jul 2002 12:21:19 -0500
I've found myself in a similar situation but with my Mark V.  It is about 7 
months
old and has been sitting idle for about 3 weeks.

I made a few Q's with it this weekend and let it sit idle for an hour.  The
main receiver is now totally gone, no receive, no hiss, no transmit.  The 
sub-receiver
does work on some bands, but it depends on what band the main receiver is set
at. 

A master reset did nothing.  A call to Yaesu resulted in the same.

So, it's now in the hands of UPS and the world of warranty repair.

I'll report on progress or lack there-of.

Greg
K9IG

>I found yersterday that my MP did not receive or transmit on 20m.
>TX/RX is dead between 7.5-14.5 MHz... Immediately when I hear relay >activate
at those limits, RX works OK and TX works where it should work. >TX relay 
activates.
Sub receiver works properly. Reset did not help.
>
>I opened the radio and checked for bad flat cable connections etc. I >also
tried if RX can hear anything when signal is connected to cable >leaving high
pass unit (cable that connects to J3502)... Nothing between >7.5 and 14.5MHz,
elsewhere nice signal.
>
>Any ideas?
>
>73, Marko - AK4XX - OH7KD
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>---
>_______________________________________________
>Yaesu mailing list
>Yaesu@contesting.com
>http://lists.contesting.com/mailman/listinfo/yaesu
>


<Prev in Thread] Current Thread [Next in Thread>