The article is on page 66 of October issue of QST.
-----Original Message-----
From: yaesu-admin@contesting.com [mailto:yaesu-admin@contesting.com] On
Behalf Of Vince
Sent: Wednesday, November 14, 2001 9:38 AM
To: Steven Moore
Cc: yaesu@contesting.com
Subject: Re: [Yaesu] Problem in ATU of FT1000D
Thanks Steve:
When I get to my local library, I will review the Hints and Kinks. I
normally
do this each time, but I have no recall of such hints/kinks.
If you or anyone else can tell me the specific article, that would be
helpful to
me in finding the QST issue.
It appears that I need to clean out the memory stack for the ATU for
matching
such extremely short physical antenna loads, as was done here on my 10m
experiment.
Is there a simple/magical reset of the ATU memory stack in the FT1kD ?
I now do have the article posting that I was originally seeking, thanks
to John,
K1RC. I cannot provide a date, if anyone else is searching the archive,
but
this is part of the heading that is included in the article:
From: Anthony Bowyer <adb1x1@yahoo.com>
Subject: [Yaesu] FT-920 Antenna Tuner Problems
Many thanks again to all that respond(ed).
73s, de ~ Vince ~
Steven Moore wrote:
> Vince,
>
> This was dealt with in qst hints and kinks a couple of months or so
ago. Rig
> was a 920 though. The guy discusses how to get it right again.
>
> 73
> Steve wd0ct
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|