Yaesu
[Top] [All Lists]

[Yaesu] FW: BOUNCE yaesu@contesting.com : Non-member submission from

To: <yaesu@contesting.com>
Subject: [Yaesu] FW: BOUNCE yaesu@contesting.com : Non-member submission from ["Juha Rantanen" <oh6xx@sral.fi>]
From: w8ik@subich.com (Joe Subich, K4IK)
Date: Wed, 6 Jun 2001 10:12:11 -0400


Message-ID: <014401c0ee8f$d0574c50$6198b183@ita.sonera.fi>
From: "Juha Rantanen" <oh6xx@sral.fi>
To: "Yaesu" <yaesu@contesting.com>
References: <GEECIDJOLKMKAHCEKPBLMEMBCBAA.helmut@df7zs.de>
Subject: Re: [Yaesu] Alternativ DVS-2
To: <yaesu@contesting.com>
Date:   Wed, 6 Jun 2001 16:51:40 +0300
MIME-Version: 1.0
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200

To add one more thing: The memories should be triggered with a computer like
in MFJ voice keyers they can be controlled through LPT port. It will
complicate the circuit a bit but not too much.

Juha OH6XX
----- Original Message -----
From: "Helmut (DF7ZS)" <helmut@df7zs.de>
To: "Yaesu" <yaesu@contesting.com>
Sent: Wednesday, June 06, 2001 2:18 PM
Subject: [Yaesu] Alternativ DVS-2


> Hi Yaesu - Owners !
>
> I think the Yaesu price for the DVS-2 voice recorder is far away
> from reality. Now I am looking to start a project to build my own.
>
> I found one possible solution here:
>
> http://www.qsl.net/va3cr/main/poor%20mans%20dvs2.html
>
> I am also looking into designs with the  ISD 1400 Series
> ChipCorder.
>
> Before I start to reinvent the wheel again - I'll give it a try to ask
> here if someone has already experience and/or designs for it ?
>
> Maybe you are intrested helping to work on that Project ?
>
> Here are the goals so far:
>
> Price should be much less than 100 dollar
> Audio quality must cope with the DVS-2
> Design should be slimm and smart (not bigger than DVS-2)
> Connection via FT-1000MP's DVS-2 Port (Mike port optional)
> The layout should be professional made on a single board
> Components should be easy available
>
> Any comments - ideas - anything ...... more than welcome.
>
> 73sss
>
> Helmut
>
> www.df7zs.de
>
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FW: BOUNCE yaesu@contesting.com : Non-member submission from ["Juha Rantanen" <oh6xx@sral.fi>], Joe Subich, K4IK <=