SR,
I have both Slice A and Slice B created and working using the Kenwood
TS-2000 as a rig. But now the question is getting spots that Writelog
receives from the Telnet to go from Writelog to SmartSDR. I do have a port
in my Flexradio CAT for 12061 which works when I use N1MM.
Mark KB3Z
On Mon, Apr 6, 2026 at 9:10 AM SR Brobakken <sr.brobakken@gmail.com> wrote:
> But how many slices do you manage to make??
>
>
> Best Regards,
> Stein-Roar Zamora Brobakken
> sr.brobakken@gmail.com
> LB3RE K3RAG
> Join me on Slack --
> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
>
> 6. apr. 2026 kl. 13:11 skrev Mark Griffin <pastormg2@gmail.com>:
>
>
> I haven't gone back to that in a while.I know that I change the radio's to
> 2 and then make the proper adjustments.
> That seems like an alternative to using the Flexradio Driver. But until
> somebody gives me some explicit help on every setting I need to make to get
> it to work I can do that.
> Mark KB3Z
>
> On Sun, Apr 5, 2026 at 9:47 PM Stein Roar Brobakken LB3RE #933 <
> post@lb3re.no> wrote:
>
>> Ahhh
>>
>> So i know setup kenwood ts2000
>> 9600 baudrate
>>
>> On each of them on other computers.
>>
>> And setup Two radio configurations.
>> Have you tried it?
>>
>>
>> Best Regards,
>> Stein-Roar Zamora Brobakken
>>
>> post@lb3re.no
>> LB3RE K3RAG LC0X
>> Join me on Slack --
>> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
>>
>> 6. apr. 2026 kl. 03:36 skrev Mark Griffin <pastormg2@gmail.com>:
>>
>> SR,
>> I tried that with Slice A being Slice A/B and Slice B as being Slice C/D.
>> But for some reason it does not recognize the B slice as Slice C/D.
>> Mark KB3Z
>>
>> On Sun, Apr 5, 2026 at 9:29 PM SR Brobakken <sr.brobakken@gmail.com>
>> wrote:
>>
>> Hello
>>
>>
>> Try setup 4 slices. I USE 6700
>>
>> A & B for radio 1
>>
>> C & D for radio 2
>>
>>
>> I do this for writelog
>>
>>
>> Best Regards,
>>
>> Stein-Roar Zamora Brobakken
>>
>> sr.brobakken@gmail.com
>>
>> LB3RE K3RAG
>>
>> Join me on Slack --
>>
>>
>> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
>>
>>
>> 6. apr. 2026 kl. 02:51 skrev Mark Griffin <pastormg2@gmail.com>:
>>
>>
>> I have looked at the written instructions regarding connecting a
>>
>> transceiver to writelog. And to be honest it is rather confusing because
>>
>> it
>>
>> seems that nobody has specific setup instructions connecting a Flexradio
>>
>> to
>>
>> Writelog. Currently I use N1MM Plus, and it works well with my
>>
>> transceiver.
>>
>> I have my CAT File which has Com Ports for Slice A and Slice B. In the
>>
>> setup of N1MM I have the transceiver picked as Flexradio and I designate
>>
>> what Com Port it is to look for that particular Slice. But it seems that
>>
>> with Writelog when I load the New Version of Writelog Flex Driver it is
>>
>> not
>>
>> reading that I have two slices. I think one of the issues is because in
>>
>> the
>>
>> Port Setup when I use Flexradio it does not ask me for a Com Port. If I
>>
>> pick a Kenwood TS-2000 then it asks for a Com Port. And no doubt the
>>
>> Software and Transceiver would communicate with each other. But at
>>
>> present
>>
>> either there is another setting that I haven't made yet or know of to get
>>
>> with the Flexradio Driver to communicate properly for both Slice A and
>>
>> Slice B of my Flexradio. I don't know if the people at Writelog know
>>
>> which
>>
>> of their users are using the software with a Flexradio. And also, what
>>
>> are
>>
>> they turning on or turning off or whatever to get it to communicate
>>
>> properly. I have come to the conclusion that perhaps Writelog cannot
>>
>> operate properly with a Flexradio with two slice receivers. I am trying
>>
>> to
>>
>> be patient with the help that I have received. But really what I need is
>>
>> a
>>
>> step by step process on connecting Writelog to a Flexradio. A total
>>
>> breakdown of what needs to be chosen and what doesn't need to be chosen
>>
>> in
>>
>> the the items for setup and whatever. Is there anyone out there in
>>
>> Writelog
>>
>> Land that can help me with this? If not, then I just lost 30.00 trying a
>>
>> software that evidently will not work with my Flexradio.
>>
>> Mark Griffin, KB3Z
>>
>> _______________________________________________
>>
>> WriteLog mailing list
>>
>> WriteLog@contesting.com
>>
>> http://lists.contesting.com/mailman/listinfo/writelog
>>
>> WriteLog on the web: http://www.writelog.com/
>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>>
>>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|