I haven't gone back to that in a while.I know that I change the radio's to
2 and then make the proper adjustments.
That seems like an alternative to using the Flexradio Driver. But until
somebody gives me some explicit help on every setting I need to make to get
it to work I can do that.
Mark KB3Z
On Sun, Apr 5, 2026 at 9:47 PM Stein Roar Brobakken LB3RE #933 <
post@lb3re.no> wrote:
> Ahhh
>
> So i know setup kenwood ts2000
> 9600 baudrate
>
> On each of them on other computers.
>
> And setup Two radio configurations.
> Have you tried it?
>
>
> Best Regards,
> Stein-Roar Zamora Brobakken
>
> post@lb3re.no
> LB3RE K3RAG LC0X
> Join me on Slack --
> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
>
> 6. apr. 2026 kl. 03:36 skrev Mark Griffin <pastormg2@gmail.com>:
>
> SR,
> I tried that with Slice A being Slice A/B and Slice B as being Slice C/D.
> But for some reason it does not recognize the B slice as Slice C/D.
> Mark KB3Z
>
> On Sun, Apr 5, 2026 at 9:29 PM SR Brobakken <sr.brobakken@gmail.com>
> wrote:
>
> Hello
>
>
> Try setup 4 slices. I USE 6700
>
> A & B for radio 1
>
> C & D for radio 2
>
>
> I do this for writelog
>
>
> Best Regards,
>
> Stein-Roar Zamora Brobakken
>
> sr.brobakken@gmail.com
>
> LB3RE K3RAG
>
> Join me on Slack --
>
>
> https://join.slack.com/t/lb3re/shared_invite/zt-rq7klws5-UEVdjQql2rH0q6bhRFo8dQ
>
>
> 6. apr. 2026 kl. 02:51 skrev Mark Griffin <pastormg2@gmail.com>:
>
>
> I have looked at the written instructions regarding connecting a
>
> transceiver to writelog. And to be honest it is rather confusing because
>
> it
>
> seems that nobody has specific setup instructions connecting a Flexradio
>
> to
>
> Writelog. Currently I use N1MM Plus, and it works well with my
>
> transceiver.
>
> I have my CAT File which has Com Ports for Slice A and Slice B. In the
>
> setup of N1MM I have the transceiver picked as Flexradio and I designate
>
> what Com Port it is to look for that particular Slice. But it seems that
>
> with Writelog when I load the New Version of Writelog Flex Driver it is
>
> not
>
> reading that I have two slices. I think one of the issues is because in
>
> the
>
> Port Setup when I use Flexradio it does not ask me for a Com Port. If I
>
> pick a Kenwood TS-2000 then it asks for a Com Port. And no doubt the
>
> Software and Transceiver would communicate with each other. But at
>
> present
>
> either there is another setting that I haven't made yet or know of to get
>
> with the Flexradio Driver to communicate properly for both Slice A and
>
> Slice B of my Flexradio. I don't know if the people at Writelog know
>
> which
>
> of their users are using the software with a Flexradio. And also, what
>
> are
>
> they turning on or turning off or whatever to get it to communicate
>
> properly. I have come to the conclusion that perhaps Writelog cannot
>
> operate properly with a Flexradio with two slice receivers. I am trying
>
> to
>
> be patient with the help that I have received. But really what I need is
>
> a
>
> step by step process on connecting Writelog to a Flexradio. A total
>
> breakdown of what needs to be chosen and what doesn't need to be chosen
>
> in
>
> the the items for setup and whatever. Is there anyone out there in
>
> Writelog
>
> Land that can help me with this? If not, then I just lost 30.00 trying a
>
> software that evidently will not work with my Flexradio.
>
> Mark Griffin, KB3Z
>
> _______________________________________________
>
> WriteLog mailing list
>
> WriteLog@contesting.com
>
> http://lists.contesting.com/mailman/listinfo/writelog
>
> WriteLog on the web: http://www.writelog.com/
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|