Re: [WriteLog] Fw: Re: Erratic Keying

[Jim <jimw7ry@gmail.com>]

I have no issues with keying my IC7610 with the ISB port. CW is good and 
clean.
BUT.... I don't use virtual comm ports. I use a MORTTY for FSK. Much 
cleaner and more accurate FSK that way.


I also use Windows 10 PRO.


Thanks
73
Jim W7RY

On 12/27/2020 2:45 PM, Salvatore ["Ted"] K2QMF wrote:
> ------ Forwarded Message --------
> From: Salvatore ["Ted"] K2QMF <k2qmf@juno.com>
> Date: 12/27/2020 3:39:56 PM
> Subject: Re: [WriteLog] Erratic Keying
> To: marsh@ka5m.net, writelog@contesting.con
>
> This is normal!!
> One solution is to use a "WinKeyer USB" between the computer and the rig!
> You can set Writelog to key the WinKeyer from the PORT menu!!  73,  Ted  K2QMF
>
>
> 12/27/2020 3:26:20 PM, marsh@ka5m.net <marsh@ka5m.net> wrote:
>
> I have a problem with erratic keying.
>
> My setup:
> Dell Computer with an i5 Quad Core 3.1 MHz
> Windows 10 Pro 64-bit
> WriteLog v 12.55G
> Icom-7851
>
> The Icom-7851 has the latest firmware version 1.31.
> For radio to computer communication, I'm using a single USB cable, Icom USB
> Driver and USB Audio CODEC version 1.30.
> The USB Driver set up 2 virtual COM ports, COM5 and COM6. COM5 is used for
> rig control and CW keying on DTR. COM6 handles PTT for FT8, and PTT and
> keying for RTTY.
>
> For contesting I press the [F2} key to send my exchange - for the Mini-CWT
> Sessions it is MARSH 1433. From 1 to 4 out of 10 [[F2] presses gibberish is
> sent.
>
> Any suggestions or comments would be appreciated.
>
> Marsh, KA5M
>
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> ____________________________________________________________
> Sponsored by 
> https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more
>
> Possible Conspiracy Theory Link Emerges in Nashville
> http://thirdpartyoffers.juno.com/TGL3141/5fe8f2756f09d72750b61st03duc1
> Sign the Bill, Lawmakers Tell Trump
> http://thirdpartyoffers.juno.com/TGL3141/5fe8f27592c7e72750b61st03duc2
> Former WWE Champ Jon Huber Dead at 41
> http://thirdpartyoffers.juno.com/TGL3141/5fe8f275b7a7d72750b61st03duc3
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/