WriteLog
[Top] [All Lists]

Re: [WriteLog] Can't Transmit SSB using Line In on K3

To: Elecraft Support <support@elecraft.com>, Writelog Forum <writelog@contesting.com>, Elecraft Reflector <elecraft@mailman.qth.net>
Subject: Re: [WriteLog] Can't Transmit SSB using Line In on K3
From: Ken Widelitz <kwidelitz@gmail.com>
Date: Thu, 3 Oct 2019 14:21:13 -0700
List-post: <mailto:writelog@contesting.com>
Problem solved. Operator error.

I had my USB Audio CODEC and 2-USB Audio CODEC reversed and each on the
wrong radio. I actually had screen shots for both setups. I guess I changed
a while ago and forgot to delete the wrong one.

See you all in CQP.

73, Ken, K6LA / VY2TT

On Thu, Oct 3, 2019 at 2:13 PM Ken Widelitz <kwidelitz@gmail.com> wrote:

> Hi Rob,
>
> As I wrote, I cannot transmit SSB using the Line In. Mic is set to Line
> 21. Yes, I am trying to use LINE IN over the built-in USB soundcard,
> Nothing is connected to the Line In on the back of the radio.
>
> 73, Ken, K6LA
>
> On Thu, Oct 3, 2019 at 1:37 PM Elecraft Support <support@elecraft.com>
> wrote:
>
>> Hello Ken,
>>
>> Thank you for contacting Elecraft.  Do you have MIC SEL set to LINE IN?
>> Have you checked the LINE level using the SPEED/MIC knob?  It looks like
>> you are trying to use LINE IN over the built-in USB soundcard, is that
>> correct?  If so, do you have anything connected to the LINE IN jack on the
>> back of the radio?
>>
>> Rob
>> Elecraft Customer Support
>> support@elecraft.com
>> 831-763-4211
>>
>>
>> On Thu, Oct 3, 2019 at 1:27 PM Ken Widelitz <kwidelitz@gmail.com> wrote:
>>
>>> I have KIO3Bs for both of my K3s (plural K3, not K3S.) In getting setup
>>> for the CQP with Writelog, I find I cannot transmit SSB using the Line In
>>> from the KIO3B on both radios. If I plug a mic into the rear mic jack and
>>> change the menu MIC SEL setting to rP.H I am able to transmit SSB.
>>>
>>> I know the mic is working to the computer's internal sound card, as the
>>> sound settings on the computer shows voice input from the mic.
>>>
>>> The KIO3Bs are working as far as reading out the frequency of the
>>> radios, so it is not a cable issue.
>>>
>>> The Writelog Sound application shows the same settings I have always
>>> used:
>>>
>>> Left Radio Rcvr - Microphone (2- USB Audio CODEC)
>>>                   Xmtr - Speakers (2- USB Audio CODEC) (Allocate
>>> exclusively)
>>>
>>> Right Radio Rcvr - Microphone (USB Audio CODEC)
>>>                   Xmtr - Speakers (USB Audio CODEC) (Allocate
>>> exclusively)
>>>
>>> Operator Mic - Microphone (Realtech High Definition Audio)  (Allocate
>>> exclusively)
>>>
>>> Help please!
>>>
>>> 73, Ken, K6LA / VY2TT
>>>
>>>
>>>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>