Hi John
Checked in Device Mgr. Not using USB to serial port converter . Am using
PCI com port board.
Port says that it is working ok. Baud rate set at 9600, same as in
Writelog.
On Thu, Mar 14, 2019 at 2:44 PM John <jlockj@earthlink.net> wrote:
>
> Hi Jim,
>
> Have you checked:
>
> 1) Control Panel > Device Manager > Ports
> To see if the computer is seeing the USB to serial port chip in the
> TS-590S? What Serial Port Number and Baud rate does it say it is?
>
> 2) The TS-590S menu item for Port Speed? 9600? **Mine is set for
> 57600** Works with Writelog and WSJT-X.
>
> John W0DC
>
> ------------------------------------
>
> On 3/14/2019 12:29 PM, James Brown wrote:
> > Hi Don and Group
> >
> > Trying to set up for BARTG.
> >
> > The TS590 is not communicating with the Wrtielog. The port setting in
> the
> > radio are correct, ie.9600, 8 1. Same in Writelog.
> >
> > Com 5 selected in Wrtielog. Same as always. Tried COM 6, but same
> result.
> >
> > I tried a different logging program that uses that com port, and it is
> not
> > communicating with the port either.
> >
> > This happened once before, after messing around with N1MM. But, then it
> > straightened out somehow, and started communicating ok in Writelog. Dont
> > know how.
> >
> > Checked the connections and cables. Seem ok.
> >
> > Any suggestions? I am at a loss.
> >
> > Thanks Jim W4LC
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|