For some reason, the line out (to TX mic jack) is called "Headphones
(High Definition Audio)" which is not what I was expecting, but the
TEST button transmits a nice test tone.
The MK2R+ microphone to sound card output is "Speakers (USB *Voice*
CODEC)". Anything else is another sound card and not what you want
for (microphone) audio to the transceiver.
> "Headphones (High Definition Audio)" is typically the headphone
output from a REALTEK chipset sound card integrated in the computer.
73,
... Joe, W4TV
On 8/17/2016 11:05 PM, Alan Maenchen wrote:
Lots of help files, but I must be overlooking the obvious so time to ask
the experts.
When I check Echo Microphone and Enable RX Losten Loop, I get this error:
Writelog sound error on echo microphone.
Capture thread exception. No common format available.
I've identified the line in and line out from the microHAM MK2R+ box. Each
seems to work OK on its own, but the echo function fails. For some reason,
the line out (to TX mic jack) is called "Headphones (High Definition
Audio)" which is not what I was expecting, but the TEST button transmits a
nice test tone.
From the error message, I assume it's talking about the PCM code. I tried a
few variants but no luck. Is that what this error means?
73, Alan AD6E
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|