WriteLog
[Top] [All Lists]

Re: [WriteLog] WL and SmartSDR integration - Bandmap / WL not sending ri

To: joeduerbusch <k0bx@arrl.net>
Subject: Re: [WriteLog] WL and SmartSDR integration - Bandmap / WL not sending right mode to SmartSDR/6500
From: Keith Goobie <keith@goobie.org>
Date: Fri, 02 Oct 2015 12:01:28 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
DXTelnet was the culprit.

Back functioning.  Testing further.

Keith


On 10/2/15 11:06 AM, "joeduerbusch" <k0bx@arrl.net> wrote:

> Keith, I suggest that you connect to dxspots.com in the telnet window andmake
> sure that DXTelnet isn't the cause of your problem.

Joe K0BX


#1 Honor Roll
> Mixed
Honor Roll RTTY
5BDXCC Plus 30,17,12
5BWAS


Stop the insanity!
Please
> do not add me to any distribution lists (Joke, Stories or Junk)
without my
> permission.

On Fri, Oct 2, 2015 at 1:20 PM, Keith Goobie <keith@goobie.org>
> wrote:

> Hi All
>
> We have the following configuration at the VE3FJB contest
> station.
>
> Flex ­ 6500 / SmartSDR 1.5
> WL 11.29b, patched with Flex Driver
> 11.30b
> DDUtil ­ latest ­ while not required, it is used for amp and
> steppir
> frequency tracking
>
> Using this set of components, we can set mode
> / freq correctly from the QSO
> entry window, but not from the Bandmap or the
> Packet DX Spot windows.
>
> We use DXTelnet ­ supported by Writelog and we
> only pass along what we
> think
> are digital mode spots.  It is configured in
> DXTelnet.  Starting mode in
> SmartSDR is RTTY and it is populated into WL QSO
> entry window.
>
> Spots get populated in the Bandmap and Packet windows.   WL
> is clearly
> running in FSK / RTTY mode and SmartSDR is 1.5 with all the
> RTTY
> enhancements.
>
> If you are using the QSO Entry Window to set the
> frequency / mode, it will
> perform correctly and pass along a freq/FSK mode
> set as a freq/RTTY for the
> SmartSDR package.  All is good.
>
> Things go
> afoul when you are seeing a spot in the BandMap or the Packet
> spot
> window.
> Double clicking the spot in either will set it to the right
> frequency but in
> the CW mode.  Clicking on Mode Change or Alt F1 will take
> it to FSK/RTTY
> mode on the right frequency, but sometimes the mode is
> correct, but the
> frequency is wrong.
>
> What is the latest versions of the downloadable
> components?  What are the
> 6500 users seeing?
>
> BTW, thanks for all the
> integration ­ looking grand.
>
> Thanks all
>
> Keith / VA3YC for
>
> VE3FJB
>
>
> --
> keith@goobie.org
> Keith Goobie
> Richmond Hill, ON,
> CANADA
>
> _______________________________________________
> WriteLog mailing
> list
> WriteLog@contesting.com
>
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:
> http://www.writelog.com/
>
_______________________________________________
Wri
> teLog mailing 
> list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writ
> elog
WriteLog on the web:  http://www.writelog.com/


-- 
keith@goobie.org
Keith Goobie
Richmond Hill, ON, CANADA


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>