Hi Guys
I'd like to be able to send CAT commands to my TRX using mouse controlled
buttons of some kind, I do this in my day-to-day logging/digital mode
software (logger32) for things like contour filter selections, IPO settings,
attenuator settings et cetera; all things that either need a menu change or
a number of user control changes. I can achieve pre-determined settings with
a single mouse click using combinations of CAT commands.
Is there a way I can set up the same or equivalent concept in WriteLog? I
have searched and found this:
http://lists.contesting.com/archives//html/WriteLog/2010-03/msg00044.html
<http://lists.contesting.com/archives/html/WriteLog/2010-03/msg00044.html>
but it's not really the same thing.
During a RTTY contest I would like, for example, to click a button and set
my contour filter Q (width) to 1, the contour centre frequency to 2200Hz and
the gain of the filter to +10dB, and perhaps turn on a narrow notch at
2200Hz also. - I can do all this with four CAT commands to my radio, the
alternative way is to enter the menu system and press multiple buttons. I
would like to be able to do this (as I do with logger32) "on the fly"
For info I run a FT-5K for RTTY contests.
Any ideas guys, and thanks for any pointers!
Mark G0MGX
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|