I am trying to set up WL to do SO2R with my DX Doubler, but the automatic
cw focus is not switching when I switch the log entry from radio1 to radio2
in WL.
This switching, of course, is controlled by a toggled +5 vdc on pin 14 of
the LPT port. My WL in not causing this voltage on pin 14 to toggle. It
remains at + 5 vdc when I switch from radio1 to radio2 and vice versa.
In my Setup Ports menu, all of the LPT port selections are greyed out. I
have activated the two radios as Left and Right, and selected 2 radios.
Radio control of the two radios and cw keying is working just fine.
What entries, if any, are required in writelog.ini to make this work?
What else in WL needs to be done to make this work?
Any suggestions will be much appreciated.
Tnx, George, K5KG
George Wagner, K5KG
Sarasota, FL
941-400-1960 cell
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|