Tnx! Once I moved the file to the virtual store, etc., it worked.
Also, had to change the mmtty.exe to the root directory to make MMTTY
function in DX4WIN.
Thanks guys!
73.
Dave K7JJ
--------------------------------------------------
From: "Gary AL9A" <al9a@mtaonline.net>
Sent: Friday, May 07, 2010 10:37 AM
To: <k7jj@arrl.net>; <writelog@contesting.com>
Subject: Re: [WriteLog] MMTTY NOT WORKING
> Dave,
>
> Which writelog.ini file are you looking at? Under Vista there are two
> writelog.ini files. Since you installed WriteLog under the Program Files
> (x86) folder there will be a writelog.ini file at C:\Windows\writelog.ini
> that I call the "false" ini file. It is created when you installed
> WriteLog, but any future configuration changes to WriteLog are saved in
> the VirtualStore path at
> C:\Users\Dave\AppData\Local\VirtualStore\Windows\writelog.ini. This is
> the actual operating ini file used by WriteLog.
>
> Both MMTTY and the MMTTY plug in are older programs that were not written
> to be installed under Vista or Windows 7. When you install the MMTTY plug
> in it puts the needed info into the "false" writelog.ini file at
> C:\Windows, which is not where it needs to be under Vista.. Copy the
> lines
>
> CustomTnc1MenuEntry=MMTTY
> CustomTnc1ProgId=WriteLog.WlMMTtyTnc.1
>
> at C:\Windows\writelog.ini and paste them into
> C:\Users\Dave\AppData\Local\VirtualStore\Windows\writelog.ini in the
> [RITTYRITE] section and it should work. Also this section should include
> the location of the full MMTTY program you installed. I've included my
> [RTTYRITE] section from my VirtualStore\Windows location. Note that I
> have installed MMTTY at the C:\ root level, not under Program Files. BTW
> my Vista is 32 bit, not 64.
>
> [RttyRite]
> CustomTnc1MenuEntry=MMTTY
> CustomTnc1ProgId=WriteLog.WlMMTtyTnc.1
> DeCheck=1
> Port=6
> Speed=0
> Type=15
> CW_RECV_FREQ=749
> CW_MIN=25
> CW_MAX=0
> X=668
> Y=492
> W=544
> H=369
> MMTTY_LOCATION=C:\MMTTY\
> MMTTY_USE_MENUS=1
> MMTTY_USE_BUTTONS=1
> MMTTY_ALWAYS_ON_TOP=0
> MMTTY_USE_PROFILE=1
> MMTTY_CQAFC=1
> MMTTY_CQNET=0
> MMTTY_SPAFC=0
> MMTTY_SPNET=1
> MMTTY_AUTOAFC=0
> SoftwareFSK=0
> ----- Original Message -----
> From: "Dave Earnest" <k7jj@hotmail.com>
> To: <writelog@contesting.com>
> Sent: May 07, 2010 6:00 AM
> Subject: [WriteLog] MMTTY NOT WORKING
>
>
>>
>> I have read earlier posts regarding Vista and MMTTY. I do not get the
>> same results as the other fellows as far as two .ini files, etc.
>>
>>
>>
>> RTTYrite comes up, but not the MMTTY panel. It worked before for years;
>> no problem.
>>
>> I recently upgraded to DX4WIN 8.04 and Writelog 10.76H.
>>
>> I removed both MMTTY and the MMTTy Plugin and tried again with negative
>> results.
>>
>> I am running Vista 64 bit. I recently had to do a clean sweep of the hard
>> drive, but backed up everything first to an external HDD.
>>
>> Any ideas on how I should approach and fix this problem?
>>
>>
>> Here is what my writelog.ini file shows at this time:
>> [Install]
>> Directory=C:\Program Files (x86)\WriteLog\
>> [Configuration]
>> WaveFileLocation=C:\Users\Dave\Documents\WriteLog\WaveFiles\
>> RecordingLocation=C:\Users\Dave\Documents\WriteLog\AudioRecording\
>> DataFiles=C:\Users\Dave\Documents\WriteLog\contest\
>> [Report]
>> CALL=K7JJ
>> [Multipliers]
>> Location=C:\Program Files (x86)\WriteLog\Programs\
>> CallPrefix=K7JJ
>> [Summary]
>> MultNames=Sec,Dx,ITU,DX,Mul,Zn,St,Grid,ZN,MUL,Ca,Co,Pref,HQ,Sta,Prov,DXCC
>> QsoNames=QSO,CW,PH,RT
>> [GreatCircleLookups]
>> RussianDX=cty_rus.bin
>> NA_cty=NA_cty.bin
>> VK_cty=VK_cty.bin
>> [RTTYRITE]
>> CustomTnc1MenuEntry=MMTTY
>> CustomTnc1ProgId=WriteLog.WlMMTtyTnc.1
>>
>>
>>
>>
>>
>>
>>
>> Dave Earnest
>>
>> k7jj@arrl.net
>>
>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|