WriteLog
[Top] [All Lists]

Re: [WriteLog] Using MMTTY with WriteLog

To: "'Joe Subich, W4TV'" <lists@microham-usa.com>, <cfmorris@bellsouth.net>, <writelog@contesting.com>
Subject: Re: [WriteLog] Using MMTTY with WriteLog
From: "Rick Lindquist" <n1rl@earthlink.net>
Date: Mon, 3 Mar 2008 21:32:43 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Very interesting, Joe. Y'know, it does get a bit confusing figuring out
which program is doing what. The curious thing with the TX and RX buttons on
MMTTY is that you can still kill the transmission by hitting the RX button
(or whatever it's called). The TX button just makes the screen kinda
flicker, so I suppose I thot it was supposed to be doing *something*.

Thanks again for all your help. I had a nice Q with a fellow in AL after I
got it all up and running.

Now, if someone can do something to improve WriteLog's really lame PSK
interface, I'd be doubly happy. 

73, Rick, N1RL 

-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Joe Subich, W4TV
Sent: Monday, March 03, 2008 8:46 PM
To: cfmorris@bellsouth.net; writelog@contesting.com
Cc: 'Don Hill AA5AU'; 'Rick Lindquist'
Subject: Re: [WriteLog] Using MMTTY with WriteLog


> Remember what I said in that last email, once you've loaded 
> the "MMTTY for Writelog from SM6SRW" (this is just the "shim"), 
> NOT to be confused with MMTTY itself, all control for PTT and 
> FSK relies on the settings within RTTYRite.  That's the reason 
> that the PTT in the MMTTY control panel no longer works. 

After a little experimentation, what really happens is that 
"Software generated FSK" is RTTYrite's cue to bypass MMTTY 
on transmission.  When using the "Software generated FSK"
settings the MMTTY plug-in is used only for receive! 

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: writelog-bounces@contesting.com 
> [mailto:writelog-bounces@contesting.com] On Behalf Of Charles Morrison
> Sent: Monday, March 03, 2008 7:04 PM
> To: writelog@contesting.com
> Cc: lists@microham-usa.com; 'Don Hill AA5AU'; 'Rick Lindquist'
> Subject: Re: [WriteLog] Using MMTTY with WriteLog
> 
> 
> > Date: Mon, 3 Mar 2008 18:39:18 -0500
> > From: "Rick Lindquist" <n1rl@earthlink.net>
> > Subject: Re: [WriteLog] Using MMTTY with WriteLog
> > To: "'Joe Subich, W4TV'" <lists@microham-usa.com>,  "'Don 
> Hill AA5AU'"
> >     <aa5au@bellsouth.net>, <writelog@contesting.com>
> > Cc: jcarcia@arrl.org, 'Charles Morrison' <cfmorris@bellsouth.net>
> > 
> > Greetings!
> > 
> > Success at last! Hallelujah!
> > 
> > One other thing I needed to do was make some changes to the 
> jumpers on my
> > RIGblaster Plus. The jumper pattern I wound up with is NOT 
> one that West
> > Mountain Radio suggests in the manual, so it was helpful to 
> know that I
> > wanted the PTT on RTS (already knew that keying was on 
> TXD). Curiously,
> with
> > these settings I can no longer do "Sound Board FSK" with RittyRite,
> although
> > I might be overlooking something there.
> > 
> > One thing that may have been leading me astray as I tried various
> > configurations is that clicking the TX button on the MMTTY 
> plug-in window
> > does NOT put the transceiver into transmit as it does with the MMTTY
> > standalone program. I had to hit one of the F keys to play 
> back a stored
> > message in order to trip the PTT and send data. This is 
> something worth
> > pointing out to others, I believe.
> 
> Remember what I said in that last email, once you've loaded 
> the "MMTTY for
> Writelog from SM6SRW" (this is just the "shim"), NOT to be 
> confused with
> MMTTY itself, all control for PTT and FSK relies on the 
> settings within
> RTTYRite.  That's the reason that the PTT in the MMTTY 
> control panel no
> longer works.  Think of it this way, if the PTT port setting 
> in MMTTY would
> actually be active, it would immediately conflict with the 
> PTT port selected
> in RTTYRite.  The software generated FSK corrects the problem 
> with some USB
> converters.. remember the Belkin FD103whateveritis doesn't 
> require this..
> only the ones that don't support the 5bit codes.
> 
> I too was unable to get Software FSK to work (just to test 
> with Rick) while
> using the Microkeyer.  However it's a nonissue, since 
> directly selecting the
> port has always worked just fine.  I guess probably because 
> of the fact that
> the Microkeyer is much more then a USB-Serial converter.
> 
> Charlie
> KI5XP
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>