Joe,
You are da man!!!
Putting that in the writelog.ini fixed the problem.. Thanks!
Jim/KC4HW
On 28 Apr 2007 at 22:40, Joe Subich, W4TV wrote:
>
> Jim,
>
> Do you have the correct CI-V address set in WriteLog and the
> IC-706mkII? If I recall correctly (and I'm not an Icom user)
> you will need to set an address override for the IC-706mkII
> if you are using the stock IC-706 driver.
>
> The IC-706 uses CI-V address 48h
> The IC-706mkII uses CI-V address 4Eh
> The IC-706mkIIg uses CI-V address 58h
>
> Since microHAM Router is displaying the correct frequency, I
> assume you have not set a custom address in the IC-706mkII.
>
> If you look at the "INI File Options" section of the Writelog
> help file the [RIGS] section says:
>
> > The following entries override WriteLog's default setting for the
> > Icom rig address for the various Icom rigs. All rigs that have Icom
> > rig addresses have corresponding entries in WriteLog.ini here under
> > the name that matches the name in the Setup Ports dialog including
> > space characters!
> >
> > Icom IC-781=0x33
> > Icom IC-756PRO=0x12
>
> Thus for your IC-706mkIIg you would need to add the following line to
> the [RIGS] section of your "writelog.ini" file:
>
> Icom IC-706=0x4E
>
> As always, check the manual/help file first.
>
> By the way ...
>
> > In Writelog I have
> >
> > Com2=commPTT
> > Com4=IC706, 9600, poll marked, and PTT=no
>
> Do not use CommPTT (software PTT) with microKEYER. Set Writelog to
> use PTT on the CW port. Writelog will command the Wikey IC to
> generate PTT. See:
>
> http://www.microham.com/Downloads/MK_WriteLog_Setup.pdf
> http://www.microham.com/Downloads/MK_WriteLog_no_WinKey_Setup.pdf
>
>
> 73,
>
> ... Joe, W4TV
>
>
>
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com] On Behalf Of KC4HW
> > Sent: Saturday, April 28, 2007 7:16 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] Writelog, microKeyer and IC706MK2
> >
> >
> > Have the microKeyer working fine and displaying frequency and
> > mode on the port screen.
> > Have setup Writelog to work with the same port, but it will
> > not display frequency/mode from
> > the 706.
> >
> > In microKeyer I have
> >
> > Control=com4
> > Winkey=com2
> >
> > In Writelog I have
> >
> > Com2=commPTT
> > Com4=IC706, 9600, poll marked, and PTT=no
> >
> > Anyone have any idea why this is not displaying the
> > frequency/mode in the log entry window.
> >
> >
> > Jim/KC4HW
> > http://www.AlabamaContestGroup.org
> > http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
> >
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.467 / Virus Database: 269.6.2/780 - Release Date:
> 4/29/2007 6:30 AM
>
Jim/KC4HW
http://www.AlabamaContestGroup.org
http://www.AlabamaQSOParty.org (June 2nd and 3rd, 2007)
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|