WriteLog
[Top] [All Lists]

Re: [WriteLog] Possible Problem with 10.56C

To: "Steve AI9T" <steve@ai9t.com>
Subject: Re: [WriteLog] Possible Problem with 10.56C
From: "JE Brown" <W4LC@fuse.net>
Date: Sat, 3 Dec 2005 14:53:41 -0000
List-post: <mailto:writelog@contesting.com>
Stevem

Exactly.  Slow tuning seems to help.  Tune quickly and the rig disappears.  I 
have found that going into port setup, then out again will restore the freq.  
Looks like a patch is needed.

Jim  W4LC
  ----- Original Message ----- 
  From: Steve AI9T 
  To: JE Brown 
  Cc: Dick Thompson ; Writelog@contesting.com 
  Sent: Saturday, December 03, 2005 04:38
  Subject: Re: [WriteLog] Possible Problem with 10.56C


  Having the same problem here with the new version here. Having to keep an eye 
on it during the TARA contest. Every time it looses rig have to save 
configuration to get it back. Like the com port is going on and off. 

-- 
73

Steve AI9T

http://www.ai9t.com

QSL via LOTW and EQsL




  JE Brown wrote: 
Dick,

It is definately something to do with the new v10.56C.  As a test, I
reverted to v10.55D, and the problem disappeared.

BTW, I have noticed, in the past, that when quickly tuning the radio up or
down, the "No Rig" notice would appear very briefly, but then the correct
frequency would always come up.  Under 10.56C, it seems that once the "No
Rig" appears, it stays.

Maybe someone on the group will have comments or a fix, or maybe a patch is
needed.

Jim     W4LC

----- Original Message ----- 
From: "Dick Thompson" <wb0dul@adelphia.net>
To: "'JE Brown'" <W4LC@fuse.net>
Sent: Friday, December 02, 2005 15:50
Subject: RE: [WriteLog] Possible Problem with 10.56C


  Well, it was just a WAG (Wild A** Guess), Jim.  Sometimes some
suggestions work.  I have WL ver. 10.54C.  If I see a major change in
some later version I'll buy an upgrade subscription.  Hope you get it
resolved.

Dick WB0DUL



-----Original Message-----
From: JE Brown [mailto:W4LC@fuse.net]
Sent: Friday, December 02, 2005 8:32 AM
To: Dick Thompson
Subject: Re: [WriteLog] Possible Problem with 10.56C


Dick,

I checked out your suggestion.  However, FSK is already selected, so it
must be something else.  I never saw this problem on previous editions
of Writelog.

Jim   W4LC




    
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


  


-- 
73

Steve AI9T

http://www.ai9t.com

QSL via LOTW and EQsL
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>