Copying E-proms that contain software in the USA is illegal and violates
MANY copyright laws.
Just because it's not a floppy disk or CD rom, it's still against the
law.
73
Jim W7RY
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of DH5HV
Sent: Friday, October 21, 2005 12:44 AM
To: k5cm@azalea.net; writelog@contesting.com
Subject: Re: [WriteLog] FT1000 older model and Interface RESISTORS?????
Hello Sir.
We did the update of 6 (!) FT1000D by sending one to YAESU Europe and
then
we took the Eeprom out of the modified one and copied the new firmware
with
an Eeprom reader to a PC.
The other FT1000D got their software by cloning the new firmware with an
Eeprom writer.
This saved us a total of at least 300 ? because the software update
costs
aprox. 60 ? here.
So please check for a FT1000D user with the latest firmware and clone
the
software to your old Eeproms.
A cold start/reset after reinstalling the new chip brings the TRX back
working with firmware 6.0 !
Jochen
----- Original Message -----
From: "Connie Marshall" <k5cm@azalea.net>
To: <writelog@contesting.com>
Sent: Friday, October 21, 2005 2:47 AM
Subject: Re: [WriteLog] FT1000 older model and Interface RESISTORS?????
> Can the firmware be updated with out sending the radio to the service
center
>
> Connie
> K5CM
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com]On Behalf Of Barry
> Sent: Thursday, October 20, 2005 1:19 PM
> To: TRENT SAMPSON; writelog@contesting.com
> Subject: Re: [WriteLog] FT1000 older model and Interface
RESISTORS?????
>
>
> Trent,
> I'm not aware of the resistor mod. The pre-V6 firmware caused the
> radio to lock up for 6 seconds while it talked to the computer.
> Apparently, it downloads the complete parameter set when any command
> is sent and takes that long to do it. You need to update the
> firmware.
> Barry W2UP
>
> On 20 Oct 2005 TRENT SAMPSON wrote:
>
> > Greetings All
> >
> > I have heard that the problems with the various interfaces used with
> > aFT1000 can be cured by the use of resistors rather than a firmware
> > change. I am trying to get a FIF232C to work with a FT1000 with 5.92
> > Firmware and it is not playing the game with Writelog
> >
> > Has anyone come across this ?? Thanks in advance
> >
> > Trent vk4ti
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.344 / Virus Database: 267.12.4/143 - Release Date:
> > 10/19/2005
> >
> >
>
> --
> Barry Kutner, W2UP Internet: w2up@mindspring.com
> Newtown, PA Frankford Radio Club
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|