Curtis
WL doesn't provide a monitor tone via the computer. Doesn't the IC736 have a
CW monitor?
73
Clive
GW3NJW
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Curtis
Sent: 23 October 2004 21:21
To: writelog@contesting.com
Subject: [WriteLog] Another blasted cw ?
I just purchased wl and have spent the better part of last night and today
trying to get the cw to become audible. I am running a Icom 736 thru a
rigblaster pro. When I press the function keys the program will key the
xmitter and I can tell that it is sending the proper code with led on the
interphase but I am not getting any audible sound out of the speakers and am
just putting out a dead carrier. My port setup is cw and rig on com 1. DVK
Windows sound board. CW keyer type on pc generates, I have to check all
mode PTT on CW port and RTS. My PTT control is on command rig on Com port.
My other programs still run good sound, (Mtty, Hamscope, etc). Does WL have
this feature or do I need to run a patch or just what?
tnx
Curtis
kg9hg
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|