Re: [WriteLog] Packet wtih Writelog

[Pat Cain KØPC <k0pc@arrl.net>]

Al,
There are a couple of places in the writelog.ini file that set up the 
packet connection to a TNC.

The [Ports] section sets the communication port speed, etc.

[Ports]
COM1:=9600,e,7,1,x
COM2:=9600,e,7,1,x
COM4:=9600,e,7,1,x
COM5:=9600,e,7,1,x
COM6:=9600,e,7,1,x


The [Packet] section sets which port is used for the TNC.

[PACKET]
PORT=6

Check to make sure these are set and match the settings on your TNC.

73,
Pat  KØPC


At 09:38 PM 1/24/2004 -0500, Aldewey@aol.com wrote:
> Newbie Question.
>
> Is there some trick to getting packet via a TNC to work with Writelog?
>
> My configuration is Windows 98 wtih COM1 connected to Radio and COM2
> connected to TNC.  This configuration works fine with NA and TR.  Also, I 
> am able to
> talk to the TNC via COM2 using Hyperterminal under Windows.
>
> However, when I select the packet window in Writelog and select COM2 nothing
> happens.  It is not clear to me if I need to do anything with the PORTS
> setting.  It looks like all you can select is Rig Control or CW control there.
>
> What am I missing?
>
> 73,
>
> AL, K0AD

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/