Thanks for all the replies.
Apparently, the mic has to be continually connected to the soundcard's mic
input for this all to work.
I have done that, and thus far, I can record messages and the MSG#.WAV files go
where they should. When I press the F-Keys they play, but the output level is
very, very low and not high enough to drive the radio at all - or it's not
going to the radio. I know that something is wrong, but I have not figured it
out yet. Also, I am getting a feedback that I think may be internal to the
sound card as it is not affected by the mic being connected or not.
The audio level is capable of going way too high when I do RTTY. ???
-Bob N5NJ
> ------------Original Message------------
> From: "Bob Naumann - N5NJ" <n5nj@gte.net>
> To: writelog@contesting.com
> Date: Sat, Jan-17-2004 11:41 PM
> Subject: [WriteLog] Original Rig Blaster and Voice Keying?
>
> I've got everything working for RTTY and CW, and now I want to get the voice
> keying stuff going.
>
> I'm using an old Rigblaster, and my mic audio does not get recorded.
>
> Writelog is recording the .wav files when I do Shift-F2, Shift-F3 etc. The
> files are just recorded silence.
>
> How will the mic audio get to the PC's sound card input and still transmit
> the recorded wav files?
>
> Bob N5NJ
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|