This is a multi-part message in MIME format.
------NetAddressPart-00--=_cgvC0272S086c8675bb
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable
I think I found the problem. I was suspicious it was related to one of t=
he
ports which have caused problems in Win2000/XP. Since the CW port was se=
t up
for LPT1, figured I'd start there. (COM ports "should" work, but some
applications are badly behaved.) Searching components, finally found
Writelog.ini in the Windows folder and zero'ed the CWTYPE and CWPORT
parameters. Now Writelog starts without error. Whew. =
Based on the above, if you are planning to migrate from one of the Win95/=
98/ME
products to WinXP (or 2000), be sure to set the configuration within Writ=
eLog
to disable the CW LPT port (and maybe the COM ports, for good measure) un=
til
the move is complete. Then you can go back in and turn them on one at a =
time
until everything is checked out. Just a suggestion - this one cost me a
couple of hours of chasing to discover it.
GL and 73,
Duane
Duane Calvin, AC5AA
Austin, Texas
____________________________________________________________________
Get free e-mail and a permanent address at http://www.amexmail.com/?A=3D1=
------NetAddressPart-00--=_cgvC0272S086c8675bb
Content-Type: message/rfc822; name="Forwarded Message"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Received: from cpdvg012 [165.212.8.12] by cpdvg203 via mtad (34FM.0700.19.01A)
with ESMTP id 397FkcgMX0462M09; Sat, 03 Nov 2001 06:38:23 GMT
Received: from contesting.com [216.1.128.73] by cpdvg012 via mtad
(34FM.0700.19.01A);
Sat, 03 Nov 2001 06:40:20 GMT
Received: from dayton.akorn.net (localhost [127.0.0.1])
by contesting.com (8.11.2/8.11.2) with ESMTP id fA361UZ11132;
Sat, 3 Nov 2001 01:01:30 -0500
Received: from urdvg135.cms.usa.net (urdvg135.cms.usa.net [204.68.25.135])
by contesting.com (8.11.2/8.11.2) with SMTP id fA360KZ11108
for <writelog@contesting.com>; Sat, 3 Nov 2001 01:00:20 -0500
Received: (qmail 542 invoked from network); 3 Nov 2001 06:08:15 -0000
Received: from cpdvg100.netaddress.usa.net (165.212.8.100)
by outbound.postoffice.net with SMTP; 3 Nov 2001 06:08:15 -0000
Received: (qmail 5645 invoked by uid 60001); 3 Nov 2001 06:00:24 -0000
Message-ID: <20011103060024.5643.qmail@cpdvg100.netaddress.usa.net>
Received: from 165.212.8.100 by mx08 for [66.68.44.100] via
web-mailer(34FM.0700.21.01) on Sat Nov 3 06:00:24 GMT 2001
From: Duane Calvin <ac5aa@usa.net>
To: writelog@contesting.com
X-Mailer: USANET web-mailer (34FM.0700.21.01)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 8bit
X-MIME-Autoconverted: from quoted-printable to 8bit by contesting.com id
fA360KZ11108
Subject: [WriteLog] WinXP and WriteLog
Sender: writelog-admin@contesting.com
Errors-To: writelog-admin@contesting.com
X-BeenThere: writelog@contesting.com
X-Mailman-Version: 2.0.5
Precedence: bulk
List-Help: <mailto:writelog-request@contesting.com?subject=help>
List-Post: <mailto:writelog@contesting.com>
List-Subscribe: <http://lists.contesting.com/mailman/listinfo/writelog>,
<mailto:writelog-request@contesting.com?subject=subscribe>
List-Id: WriteLog for Windows <writelog.contesting.com>
List-Unsubscribe: <http://lists.contesting.com/mailman/listinfo/writelog>,
<mailto:writelog-request@contesting.com?subject=unsubscribe>
List-Archive: <http://lists.contesting.com/pipermail/writelog/>
To: <writelog@contesting.com>
Date: 3 Nov 2001 00:00:24 CST
Last weekend I did a migration install of WinXP on my formerly WinME system.
Most things have worked well, and the improved stability was immediately
obvious (but then WinME would make anything look solid)... But now my problem
- WriteLog fails immediately after the contest window appears on the screen.
Error signature is:
AppName: writel32.exe AppVer: 10.0.28.4 ModName: wlogcw32.dll
ModVer: 10.0.23.5 Offset: 000011d9
Is anyone running WriteLog 10.28D on WindowsXP Home, and if so, did you have
any trouble getting it to run? Since I can't get it up to change any
configuration info, I can't tell if this is the CW module ("wlogCW32.dll" ??)
which was pointed at the LPT or something completely different. I've
completely uninstalled and reinstalled with the exact same error. Suggestions
welcome (no, I'm not going back to WinME - hi!)
73, Duane
Duane Calvin, AC5AA
Austin, Texas
____________________________________________________________________
Get free e-mail and a permanent address at http://www.amexmail.com/?A=1
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
------NetAddressPart-00--=_cgvC0272S086c8675bb--
|