Hi Dave,
You will need to edit the wave files to delete the spaces in the messages.
It DOES work as I used it with great success in the NAQSO party. The
software to edit the wave files can be found at tucows. The windows program
doesn't offer the features you need to have to edit the files. I used a
program called "Wave flow" which lets you see the wave form. Also, you will
need to make sure you use a high quality mic to record the wave files as the
cheapy computer mics won't do very well. If you use a heil headset, it can
plug directly into the sound card and you can get some very nice wave files.
Good luck, es Marty AA5UN
----- Original Message -----
From: Dave Earnest <k7jj@arrl.net>
To: <writelog@contesting.com>
Sent: Wednesday, August 29, 2001 6:30 PM
Subject: [WriteLog] Soundboard DVK Problem
>
> Hi gang,
>
> I got the soundboard to work with the Record on the fly messages.
> However, after recording the alphabet and the numerical characters I get
> squat.
>
> I put a message in the SSB memories:
>
> C% <msg1.wav>
>
> What it played back was "Charlie> (then a huge space) then "two"
>
> The help file says the Windows player will read out the call sign from
> the c:/ham/wavefiles directory and then read the message. It is not
> happening.
>
> The port and CW/RTTY/SSB Message setup is per the book. SSB is selected.
> Again, the record on the fly messages are working fb.
>
> What am I missing?
>
> 73,
>
> Dave K7JJ
>
> --
> David E. Earnest
> k7jj@arrl.net
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|