I just put one into a new WIn2K machine that I built up for the shack. It
seems to be working OK with TrueTTY, Spectrogram, Stream and DigiPan, but I
haven't tried it specifically with WriteLog yet.
A couple of things to note.
(1) The PCI128 has two LINE outputs, but no speaker outputs, so you will
have to use amplified speakers. I had a set of amplified speakers, but they
were low-Z and swamped the output of the PCI128.
(2) I fed the PCI128 from the "Audio Out" jack of the FT-920. This is
essentially a LINE out with a max of 100mV. The PC128 seem less sensitive
than my old PCI16. However since I tore everything down to make all the
changes there maybe a miswire somewhere causing the problem.
73s,
-ricK7log
-----Original Message-----
From: owner-writelog@contesting.com
[mailto:owner-writelog@contesting.com]On Behalf Of Jim Reisert AD1C
Sent: Wednesday, January 31, 2001 1:14 PM
To: writelog@contesting.com
Subject: [WriteLog] Creative Labs Audio PCI 128-bit PCI Sound Card -
only $17
Look on this web page:
http://www.teamexcess.com/
Only $17!
Was this a recommend or an avoid for WriteLog?
73 - Jim AD1C
p.s. standard disclaimer applies
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|