Thats a little criptic, so I have to select CW PTT for SSB PTT to work, OK I'll
try that tonight. Is this documented somewhere, I checked the help file index
searching on "dvk" and didn't find anything. Thanks for your assistance Mike.
Mike Mellinger WA0SXV wrote:
> Actually, v10.19 (and possibly earlier versions) control the RTS line during
> DVK transmissions. Setting it up involves checking the CW button on the
> comm port, selecting CW PC generates, DVK sound board. Go to CW PTT and
> select LPT/COMM RTS and it will work. All of those steps may not be
> necessary.
>
> 73,
> Mike WA0SXV
>
> ----- Original Message -----
> From: "Les Peters" <les.peters@ne.arris-i.com>
> To: "Richard B Drake" <rbdrake@erols.com>
> Cc: <writelog@contesting.com>
> Sent: Monday, October 09, 2000 09:12
> Subject: Re: [WriteLog] RIGBLASTER and DVK
>
> >
> > While it is true that for CW, RTTY, and digital modes Writelog can
> > control the PTT line it does not have the capability to control it for
> > SSB operation. If you look at the port setup menu you will notice the
> > only available option for configuring a DVK is parallel port (LPT1 -
> > 4). Again I say the issue here is that no software driver exists to
> > control the PTT line for SSB operation. You can key your transceiver's
> > PTT line yourself with a footswitch but as far as VOX operation your out
> > of luck.
> >
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|