I'll put in a plug for the Axis Q6128E. I have one on my tower at a remote
location, and can steer it around from my smartphone or any Internet
connected computer throughout the world. The camera hardware is phenomenal,
the software not so much.
Doug W6DSR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
jimlux
Sent: Friday, September 4, 2020 09:36
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Pan,zoom,tilt camera on tower
On 9/4/20 9:24 AM, Michael Poteet wrote:
> I will toss in the Sunba 405-D20X PTZ Cam. I have one mounted under
> eave that has been in operation for three years. Temperatures range
> from minus
> 10 or so up to mid 90s. It is POE+ which may be a problem if your
> install point is distant. I use Blue Iris software to monitor and
> control the camera.
>
> Mike W5FTD
>
>
Quite reasonably priced for something with Ethernet access - And they're not
harvesting your images like Ring, etc. do.
It's 2MPix so not like the fancy HD or 4k cams from Axis
Axis and Pelco are your two big industry leaders, but they do charge for it.
They do have great support, so if you're a business putting cameras, they're
probably worth it.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|