I agree with you guys.  You can buy the OR2800 without the controller.  The Green Heron controller 
is a much better way to go.  Also get the K7NV mast clamp designed for the OR2800.  The mast clamp 
that comes with the OR2800 slips even when the clamp bolts are carefully torqued down.  Ask me how I 
know this  hihi.
Here's info on the Green Heron controller and the K7NV mast clamp:
https://www.dxengineering.com/parts/ghe-rt-21-m2
http://www.k7nv.com/proppitch/id35.htm
BobK6UJ
       From: Kent Olsen <kilo6dko@gmail.com>
  To: towertalk@contesting.com
  Sent: Sunday, August 26, 2018 1:09 PM
  Subject: Re: [TowerTalk] Big Rak and HDX-555
   
ThaI did both!
The Green Heron works great!
73
Kent
N6WT
On Sun, Aug 26, 2018 at 1:03 PM <john@kk9a.com> wrote:
 From what I have read on towertalk, it is a good rotator if you throw away
the mast clamp and controller.
John KK9A
From:  Kent Olsen <kilo6dko@gmail.com>
Date:  Sun, 26 Aug 2018 08:14:01 -0700
Phil
I went with the M2 Orion 2800 rotor. It fits in the tower completely. It
has been up for 3 years with a SteppIR DB36 with a NN4ZZ tilt plate. This
is a very heavy combo, I have not had a bit of trouble.
Thanks
73
Kent
N6WT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
    
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk