Towertalk
[Top] [All Lists]

Re: [TowerTalk] F-12 Linear Loading Wire

To: "john@kk9a.com" <john@kk9a.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] F-12 Linear Loading Wire
From: Wayne Kline <w3ea@hotmail.com>
Date: Tue, 24 Oct 2017 03:51:05 +0000
List-post: <mailto:towertalk@contesting.com>
John,

 RGR on Linear loading is not the BEST  electrical ( RF) Design....  the 
Tornado loading coals available   from JK would be the cat's MEOW  but a 48 
apiece X  8    and then the new extra aluminum need to strengthen the element 
...  I'll  think I am leaning on using  the  9 Ga. copper weld.
This antenna is going up on a 74 ft tower I put up two years ago with two Home 
Brew  HB 6 element OWA  10 meter stack 75/40  but  it's now going to be a 
12/17/30 meter tower wit the two element  40  ( I'll point it S S/E for the 
Caribbean SA) and use my  other  two element forty on  it's own tower  @ 108 
pointed on EU   JA   ZL VK

Wayne W3EA


________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of john@kk9a.com 
<john@kk9a.com>
Sent: Monday, October 23, 2017 10:16 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] F-12 Linear Loading Wire

Years ago I had a homebrew 80m dipole with stainless steel wire rope element
support/loading wires. There were never any mechanical issues however
stainless is a poor conductor compared to aluminum. I am not sure what
effect this had, also linear loading is probably not the best method of
element shortening.

John KK9A

To:     "towertalk@contesting.com" <towertalk@contesting.com>
Subject:        [TowerTalk] F-12 Linear Loading Wire
From:   Wayne Kline <w3ea@hotmail.com>
Date:   Mon, 23 Oct 2017 23:16:32 +0000

Hello TT'ers.

  I am In the process  of rehabbing   a  Force 12 Delta  240/230  beam
antenna.
In the past I have rebuilt/repaired the original F-12  wires with Aluma-weld

12GA.
If my memory serves me there was a thread  in the past because of the
flexing
and hardening  resulting in failure... another  type of wire was substituted
?

 Coper Weld ? Galvanized  fence Wire ?

Wayne W3EA

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>