Towertalk
[Top] [All Lists]

Re: [TowerTalk] 10 meter beam.

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 10 meter beam.
From: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
Date: Sun, 5 Feb 2017 12:19:35 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If you want to prove that your MP33 is almost as good as your 4 element 10 meter beam you should just side mount it on your tower at 16 feet below your tribander and compare the difference. I would venture that the difference would not be worth the effort of even keeping the single band beam up.


Herb, KV4FZ


On 2/5/2017 11:26 AM, Joe Subich, W4TV wrote:

Why do you want to stack another 10 meter antenna above the
MP33warc+40?  The MP33warc+40 already covers 10 meters.

A separate 10 meter monoband antenna and the MP33warc+40 would
certainly have detrimental effects on each other at any practical
spacing (less than 1/2 wave).

73,

   ... Joe, W4TV


On 2/5/2017 10:10 AM, GMuller885--- via TowerTalk wrote:
Hi:
    I live in a residential neighborhood. My tower is 50  feet high as
restricted by City ordnance. I have a MP 33 WARC + 40m beam. I want to stack a
4 element 10 meter beam on top of the MP33warc+40.  What is the spacing
required and what is the off set in relation to the MP33warc+40? Any help to
this 5 year old General ham would be greatly appreciated.

Gerald Muller K9GEM
GMuller885@aol.com
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>