John,
I don't know the capacity of your TX455 gearbox but it would not be
over one quart.
My HDX589 gearbox takes exactly one quart.
As you probably already know it is important to flush the old gear
lube out with
the synthetic lube you are going to use. The original lube and the
synthetic are
not compatible. I would order two quarts. That should work fine for
flush and fill.
Here's a supplier that I have used.
https://www.zoro.com/mobil-mobil-shc-630-circulating-iso-220-1qt-120272/i/G0943074/
Bob
K6UJ
On 9/5/16 10:27 AM, John Holmes wrote:
I was reading with interest the explanations of the lube needed for US
Towers. My TX455 has been up for five years now and, while I have
lubed the
grease fittings regularly, I've never changed the oil. I want to do
this now
using SHC630 as K6UJ noted. However, before I order this, how much
would you
recommend I order? Would 2 quarts be enough to both flush the gear
assemble
and refill it? I'd hate to have too little on hand after draining.
Thanks for your help.
73,
John W9ILY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk