Hi Bob,
I just bought a pair for my older model g-2700SDX from Tom W3FRG who has a
complete supply of all the Yaesu plugs/connectors.
You can reach him at W3FRG01@verizon.net.
If you check his qrz.com page he has pics/prices there.
73 Darrell AB2E
________________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Simon Lewis
<gm4plm@hotmail.com>
Sent: Friday, April 29, 2016 6:49 PM
To: bob; towertalk@contesting.com
Subject: Re: [TowerTalk] Need source for G-2800 controller connector
Array solutions?
I’ve seen them on ebay too
Plus I know you can get them at ukw bereichte in Europe
Sent from my Windows 10 phone
From: bob<mailto:w9zv@comcast.net>
Sent: Saturday, 30 April 2016 10:05 AM
To: towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: [TowerTalk] Need source for G-2800 controller connector
I have a G-2800 rotator that I am pulling out of the closet to use and I
cannot find a source for the Jones type connector that is on the rotator
controller box (NOT the rotator end).
The connector has two rows of 3 horizontal pins with one of them
keyed/oriented 90 deg from the others. I have looked on Mouser/DigiKey and
while the have them with 6 pins in two rows, I cant find one with the one
pin keyed/polarized from the others?
Anyone have a source for them?
-bob, w9zv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|