Towertalk
[Top] [All Lists]

Re: [TowerTalk] PEX tubing for antenna spacers?

To: "Patrick Greenlee" <patrick_g@windstream.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] PEX tubing for antenna spacers?
From: "Larry Banks" <larryb.w1dyj@verizon.net>
Date: Sat, 12 Mar 2016 12:20:29 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks Patrick,

My next question of course: what would you or anyone else recommend for a lite colored (blue?) UV-stable / non-conductive paint?

73 -- Larry -- W1DYJ



-----Original Message----- From: Patrick Greenlee
Sent: Saturday, March 12, 2016 12:11
To: towertalk@contesting.com
Subject: Re: [TowerTalk] PEX tubing for antenna spacers?

Don, Garden variety PEX (Cross-linked polyethylene) is not UV stable and
should never be purchased from a supplier who stores his stock outside.
There are however available sources of UV stabilized PEX. Not being the
most trusting ("Trust but verify," Ronald Reagan) person I'd paint
anything I was not sure of with UV stable paint.

Patrick        NJ5G

On 3/12/2016 11:00 AM, Larry Banks wrote:
Thanks Don,

I guess I’ll go back to my first choice of PVC – it’s just three times heavier!

73 -- Larry -- W1DYJ



From: Don Moman VE6JY
Sent: Saturday, March 12, 2016 11:37
To: Larry Banks
Subject: Re: [TowerTalk] PEX tubing for antenna spacers?

The milky white PEX tubing I have is very UV susceptible. I used some short lengths to slip over RG 213 to protect it against chafing and it all cracked/split pretty quickly.

73 Don
VE6JY



















On Sat, Mar 12, 2016 at 4:28 PM, Larry Banks <larryb.w1dyj@verizon.net> wrote:

   Hi All,

Has anyone used 1/2” PEX tubing (normally used for plumbing) as a spacer for open-wire line or fan-dipoles? (PEX is cross-linked polyethylene.)

It is cheap in 5’ lengths, easy to work, and passes the microwave oven test, so it isn’t conductive. (The white stuff that I have microwave tested is not UV resistant, so there is a question about how long it will last outside.)

As it is very light weight and seems to be fairly rigid, it looks like a good candidate for this purpose. Any experience with this stuff out there?

   73 -- Larry -- W1DYJ

   _______________________________________________



   _______________________________________________
   TowerTalk mailing list
   TowerTalk@contesting.com
   http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>