If you are using 6061-T6, I doubt this will work.
John KK9A
To: pulsarxp@embarqmail.com, towertalk@contesting.com
Subject: Re: [TowerTalk] Joining Boom Tubing
From: Bob via TowerTalk <towertalk@contesting.com>
Reply-to: WW4T@aol.com
Date: Mon, 15 Sep 2014 09:07:03 -0400
Quick, cheap easy and effective.....
Go to a local muffler shop...
Show them what you're trying to do...
Let them put the tubing in their 'expander'....and bump it open slightly
for the fit you need....
I would take a short sample for them to practice on before doing the pieces
you actually use....
Shouldn't cost but a few $$, and take a few minutes of their time...
GL
Bob _ww4t@aol.com_ (mailto:ww4t@aol.com)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|