Towertalk
[Top] [All Lists]

[TowerTalk] XM240 element length question

To: <towertalk@contesting.com>, <cx6vm.jorge@gmail.com>
Subject: [TowerTalk] XM240 element length question
From: "D. Drake" <daleaa1qd@gmail.com>
Date: Sun, 4 May 2014 16:40:34 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Here's the SWR curve for my XM-240 Jorge. It may
not answer your question exactly but you can see
my results.  The antenna actually ended up
resonant a bit higher in freq than I tried to set
it for.

 

AA1QD

 

Message: 6

Date: Sun, 4 May 2014 16:20:06 -0300

From: "Jorge Diez - CX6VM" <cx6vm.jorge@gmail.com>

To: <towertalk@contesting.com>

Subject: [TowerTalk] XM240 element lenght question

Message-ID:
<53669313.6304ec0a.3648.fffffc40@mx.google.com>

Content-Type: text/plain;
charset="us-ascii"

 

Hello

 

 

XM240 manual say about CW, MID and PH lengths to
make it resonant in 7025,

7125 or 7225 Mhz

 

 

What is the bandwidth? If I assemble it for 7025
Mhz, do you know SWR at

7.200 Mhz?

 

 

If I assemble it for 7.125 Mhz, do you know SWR at
7.001 Mhz?

 

 

Thanks,

 

Jorge

 

CX6VM/CW5W

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] XM240 element length question, D. Drake <=