---------- Forwarded message ----------
From: Ray Benny <rayn6vr@cableone.net>
Date: Sat, Oct 13, 2012 at 7:44 PM
Subject: Re: [TowerTalk] Aluminum for 80m vertical
To: jcjacobsen@q.com
I've been using 30 ft pieces of 2", 3 " and 4" irrigation pipe for30 years.
Its cheap (used) and very light. It is not real strong so I guy it twice
with dacron. The only difficulty is making the reducers for each of the
different size pipes. If you have a machinist handy, they can be cut
from blocks of aluminum. You can also make reducers by sliding and
combining different diameters of Al pipe or tubing. One foot overlap is
plenty. I place one at the bottom of the inner pipe, and one at the top of
the outer pipe. For a base I use a 4" dia by 1 ft piece of ABS pipe as an
insulator, then use a 3/8" bolt as a pivot that goes thru 5" - 6" angle
iron or Al. These are mounted to my ground plate, plus the radials.
If you need further details, let me know.
Ray,
N6VR
On Sat, Oct 13, 2012 at 4:30 PM, <jcjacobsen@q.com> wrote:
> Yo,
>
> Rudy is looking for aluminum suggestions for building antennas:
>
> <I was wondering if anyone can help me select the right material for
> full-size 80m verticals. My questions are as follows: >
>
> Rudy, I don't have one myself, but have you considered a Hy-Gain High
> Tower??? It seems that the people who have them LUV 'em! Close to full size
> on 75/80, and you have 40 thru 10 meters also. They come up from time to
> time on the various "for sale" sites.
>
> Just thinking.............
>
> 73
> K9WN Jake
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|