Towertalk
[Top] [All Lists]

Re: [TowerTalk] Looking for a good, mechanically rugged, and anti rust p

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Looking for a good, mechanically rugged, and anti rust paint
From: "Pat, K7KR" <k7kr@k7kr.com>
Date: Fri, 10 Aug 2012 13:17:20 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
You might look into Tnemec. They specialize in high performance coatings
for a wide variety of demanding applications.

http://www.tnemec.com/

No relation, just a satisfied user. Give 'em a call and let them suggest a
product and supplier.

73, Pat K7KR

----- Original Message ----- 
From: "Grant Saviers" <grants2@pacbell.net>
To: "K8RI" <K8RI-on-TowerTalk@tm.net>
Cc: <towertalk@contesting.com>
Sent: Friday, August 10, 2012 10:14 AM
Subject: Re: [TowerTalk] Looking for a good, mechanically rugged, and anti 
rust paint


> I've had great results with Rust-Oleum Direct to Metal (oil) alkyd
> enamel paint (Grainger stock item, others as well).  I use two coats of
> primer, red first, then grey to prove coverage, followed by two coats of
> finish color, mostly Safety Yellow, all HVLP applied. Structural stuff
> that is in use and left outside for 10 years still has gloss and no
> rust.  I can't speak to repeated wear resistance, that may require a two
> part epoxy paint.  I've found the 100% solids versions to be very user
> unfriendly - hard mixing, fumes, short work times, critical surface prep
> & special solvents for cleanup. OTOH, the RustOleum water based two part
> epoxy floor paint is easy to use, but nowhere as tough as the 100%
> solids.  Both are around $140/gal.
>
> Grant KZ1W
>
> On 8/9/2012 9:34 PM, K8RI wrote:
>> I'm looking for a paint (and primer or undercoat) that will protect the
>> structural steel from rust and wear well.  There will be rollers or
>> skids moving on the painted surface and at times will be under
>> substantial pressure. IE Tower sections.
>>
>> I do have access to industrial paint locally, just not sure what to ask
>> for.  Tubing will be capped and welded closed with a bit of preservative
>> inside.
>>
>> 73
>>
>> Roger (K8RI)
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>