Towertalk
[Top] [All Lists]

Re: [TowerTalk] low band antenna without good ground

To: "Ian White GM3SEK" <gm3sek@ifwtech.co.uk>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] low band antenna without good ground
From: "Mark Robinson" <markrob@mindspring.com>
Date: Fri, 23 Sep 2011 12:18:30 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Great ideas. I am going to try that this winter. I have a roll of some of 
that farm fencing in the barn. It has big squares at the top and smaller 
squares to the bottom. I haven't seen the square plate device that you 
mention here but I will do some internet searching.


Mark N1UK



> Larry wrote:
>>The small square image on the web site you pointed to looks like
>>a split ground wire bolt. I have not seen them as galvanized before
>>but they are readily available in several sizes in brass in the electrical
>>departments of places like Home Depot and Lowes. I suppose it
>>is the "No image" pieces you were really pointed at.
>>
>
> That's correct. The missing image is of a pair of square plates in
> galvanized steel, that bolt together with interlocking fingers to make
> crossover connections. They're just perfect for the stock fencing that I
> described, with its large square mesh.
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>