You're going to want to sand off the flakes. If it flakes and you paint it,
the paint will flake. Caution - if you sand fiberglass, take steps to avoid
breathing the dust.
Pettit Easypoxy is a one part polyurethane that goes on beautifully (with a
good, fine brush) and will last for many years. It is made for marine use,
including fiberglass boats. You can get it at your local marine store or
mail order.
Any really good paint for fiberglass isn't going to be cheap. Count on $25 -
$40 for a pint of paint and a good brush - but it will look fantastic.
73,
Mickey N4MB
On Fri, Aug 27, 2010 at 11:41 PM, K0DAN <k0dan@comcast.net> wrote:
> I have an old motorized Tri-Ex LM470 tower. All is well, given periodic
> maintenance.
>
> I replaced the control box (apparently some type of fiberglass compound)
> about 12 years ago...the interior components are still in good shape but
> the
> exterior of the box is starting to "flake" due to solar radiation and or
> exposure to the elements.
>
> Anyone know of a good paint, PVC, or other compound I can brush over it to
> seal it, stop the deterioration, and buy another 10+ years?
>
> Thanks and 73
>
> Dan
> K0DAN
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Mickey Baker
Fort Lauderdale, FL
“Tell me, and I will listen. Show me, and I will understand. Involve me, and
I will learn.” Teton Lakota, American Indian Saying.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|