Loctite. Doesn't need to be red. The green will work
Safety wire on bolt and nut. If you can't find drilled nuts and bolts, they
make a sort of stamped thing that fits around the hex and has lugs for the
wire. Conceptually it is like putting a wired socket or box wrench on it.
Sent via BlackBerry by AT&T
-----Original Message-----
From: "Mike & Coreen Smith" <ve9aa@nbnet.nb.ca>
Date: Thu, 6 May 2010 21:24:46
To: <towertalk@contesting.com>
Subject: [TowerTalk] My 48' Delhi Self Supporter folded over :-( lost its
bolts!
Hi Guys,
Mike VE9AA here.
My 48' Delhi Self Supporter folded over a couple days ago .....
As far as I can tell, the reason this happened is 2 large bolts (with lock
washers) backed themselves out and there were only 2 remaining legs holding
it up. We had some wicked wind up here on the hill the other night, and
poof, it's was over.
Has anyone else heard tell of this happening to any other Delhi towers? (or
'similar' self supporting flat-stock towers like a Titan, etc.)
After the fact, I heard that VE1DX had the exact same thing happen to him.
http://www.ve1dx.net/fall_down.html
What can I do to prevent this in the future please? Red Loctite? Tighten
bolts yearly? Other?
73/TNX, Mike VE9AA
Mike, Coreen & Corey Smith
699 Rte 616 Keswick Ridge
NB
Canada
E6L 1T1
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|