Am I going to work something on a SteppIR that I can't work on a LP? Or a
TH7?
Don't think so.
73 Buddy WB4M
----- Original Message -----
From: "Steve, W3AHL" <w3ahl@att.net>
To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Sent: Saturday, January 23, 2010 8:05 PM
Subject: Re: [TowerTalk] steppir v. lpda
> Since the Tennadynes that I've seen have a 50 ohm nominal feed point Z,
> not
> 200 ohm, the issue is a little different.
>
> Having a balun at the front of the boom isn't a problem if it's
> constructed
> correctly. Using a coil of coax bundled up and flapping in the breeze
> will
> eventually lead to failure probably. A better solution is to use ferrite
> core balun is mounted in a weatherproof plastic box with its output
> terminals screwed into the boom / transmission line.
>
> Some Tennadyne owners do place the 1:1 balun at the mast plate and claim
> there is no significant difference in the pattern.
>
> What affect the feed line imbalance has in either case hasn't been evident
> in the few field measurements I've seen posted. Whether it is enough to
> justify constructing a custom balanced feed line back to the mast is
> doubtful, if a couple of ferrites at the mast are effective.
>
> LPDA's that do use a 200-ohm transmission line boom usually have a feed
> point Z of 95-110 ohms.
>
> Steve, W3AHL
>
> ----- Original Message -----
> From: "Gene Fuller" <w2lu@rochester.rr.com>
> To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
> Sent: Saturday, January 23, 2010 4:23 PM
> Subject: Re: [TowerTalk] steppir v. lpda
>
>
>> For the umpteenth time,ehy not make up 200 ohm line,using 1/4" copper
>> tubing, on standoffs to keep aay from the boom, placing the balun back at
>> the mast, where it is accessible.
> ..snip..
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|